Haas Commercial: 2000 Series

2000 Series

FEATURES

  • 2" Thick
  • R-17.66
  • 2” or 3” Track
  • Double Steel End Stiles
  • Exhaust Port
  • Cam Safety Device
  • Spring Bumpers
  • Chain Hoist
  • High Cycle Springs
  • Wind Load Rating
  • Glazing (lites)
  • High Cycle Rollers
  • Aluminum Full View Section
  • Pass Door
  • Keyed Lock
Optional Exhaust Port (interior view)
Pass Through Door (exterior View)

The Strength To Keep Out Noise And Weather

Haas 2000 Series commercial insulated steel doors are manufactured with the elements in mind. They will enhance the beauty of your building while at the same time, insulate and dampen outside noise. Choosing high R-Value sectional doors combined with an air infiltration seal will help increase energy efficiency and savings. Polyurethane insulation provides the highest R-Values available in sectional steel doors. 2000 series doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet wind load specifications and to comply with ANSI/DASMA 102-2004. The protective coating system is found on both the interior and exterior steel.


2000 Series Quick Reference Guide

Model Panel Door Thickness R-Value* Max Door Size End Stile Type Section Skins Color & Window Oprions
Width Height Inside Outside
2010 2" (50.8mm) 17.66 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
2012 2" (50.8mm) 17.66 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
2014 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
2016 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
2032 2" (50.8mm) 17.66 24'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA
Smooth Steel
Polar White & Brown
2033 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
2032-20 2" (50.8mm) 17.66 24'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA
Smooth Steel
Polar White & Brown
2033-20 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
2050 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 GA V-Groove
Stucco Aluminum
Polar White
2051 2" (50.8mm) 17.66 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 Flush
Stucco Aluminum
Polar White
2060
2072
2082
2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Short Panel
Woodgrain Steel
All Colors
2061
2071
2081
2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Short Panel
Woodgrain Steel
All Colors
2063
2073
2" (50.8mm) 17.66 18'-2" 16'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Long Panel
Woodgrain Steel
All Colors
2064
2074
2" (50.8mm) 17.66 18'-2" 16'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Long Panel
Woodgrain Steel
All Colors
2070 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ranch Panel
Woodgrain Steel
All Colors
2080 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Raised Panel
Woodgrain Steel
All Colors
2090 2" (50.8mm) 17.66 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Sculptured Panel
Woodgrain Steel
All Colors

*calculated R-Value

Note: Certain weights and/or applications may limit the size allowed

Available Colors

All colors are not available in every model number. Refer to the chart above for color availability.

Colors are not exact due to the differences in monitors. Refer to samples at Milan Door Service for exact color match. Call (440) 943-1300

Standard Colors


Polar White

Almond

Sahara Tan

Sandstone

Gray

Charcoal

Bronze

Brown

Hunter Green

Premium Colors


Trinar White*

Trinar Beige*

Trinar Brown*

Cool Black**
*Trinar Colors include a 35 year paint warranty.
**Cool Black includes a cool chemistry paint finish but is not recommended for projects with extreme exposures to heat and light.

Haas 600 Series Details

The Strength To Keep Out Noise And Weather

Haas commercial insulated doors stand up to the elements, while dramatically decreasing exterior noise and enhancing the overall aesthetics of your building at the same time. Choosing one of our insulated doors will help increase energy savings, as our CFC-free polyurethane provides one of the highest R values available in sectional doors.

Haas garage doors are made from steel that contains 80% recycled material. They are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet wind load specifications and to comply with ANSI/DASM 102-2004. The protective coating system is found on both the interior and exterior steel.


Full Thermal Break

A full Thermal Break is used in the tongue-and-groove construction of all commercial insulated doors. This rigid vinyl extrusion seals the joints and eliminates metal-to-metal contact between door sections, which limits the transfer of temperature. This also provides optimum water and wind resistance.


Hard Working Hardware

The track is 2” or 3” galvanized steel, depending on door size, with bracket mount for wood jambs or continuous reverse mounting for steel jambs. For angle-mount track, door widths are 2” wider than the opening. Track rollers are 2” or 3” case-hardened inner and outer steel races with 10-ball pre-lubricated bearings.

Hinges, brackets, and reinforcing struts are hot-dipped galvanized steel. Fasteners are plated for maximum corrosion resistance. Counterbalancing springs are torsion type, computer calibrated to match door load. This provides a 10,000-cycle life at the minimum; optional spring wires can achieve 25,000, 50,000 and 100,000 cycle requirements. Springs are wound from oil-tempered wire and mounted on a continuous cross header tube or solid shaft, as determined by torque load.


CFC-Free Polyurethane Foam Construction

The polyurethane foam in a Haas garage door section is fully enclosed inside the steel skins. This design puts the insulation properties of polyurethane foam far ahead of polystyrene foam for performance and value.

Polyurethane foam is a two-part system. It begins with two chemical blends that when mixed together expand and cure to fill the garage door panel. During the expansion, the foam completely fills the inside of the panel and becomes fully adhered to the steel skins of the garage door panel to form a composite structure that is of exceptional strength and rigidity. Polyurethane foams are very stable when encapsulated inside a garage door section.

Insulating with polyurethane provides a superior product with higher insulation properties and a stronger unitized section.


Unique Paint System

All Haas steel garage doors include a three-tier, corrosion-resistant protective paint system with a polyurethane primer and durable polyester finish coat on the interior and exterior. Haas Door’s paint thickness is one of the highest in the industry and most of the 600 SERIES models are available in 11 colors.


Weather Seal, Wind Load

A full-length, one-piece heavy vinyl bottom weather seal prevents infiltration of air, rain, snow and debris. The seal reduces impact shocks when the door is closed against concrete flooring.

Haas garage doors are available in a wide range of design pressures for wind load requirements.

Address:
2765 Rockefeller Road, Willoughby Hills, OH 44092
Click Here For Map
Email:
For more information:
mds@oh.rr.com
Phone:
(440) 943-1300
(216) 391-6868

Areas of Service:
Cuyahoga, Lake, and Geauga counties

Accents Woodtones:

Now is the perfect time to makeover your garage door with our Accents Images. Click for more details.
Other Services:
Repair Broken Springs, Openers & Cables

Expert Installation

Install & Service New Openers

Install & Service New Residential Garage Doors

Install & Service New Commercial Garage Doors

Full-Line of Wood, Fiberglass, Aluminum & Steel Doors